Basswood plywood 3 mm — Cut with xTool D1 Pro 20 W
Directly sourced starting point for cut with xTool D1 Pro 20 W.
- Machine
- xTool D1 Pro 20 W
- Material
- Basswood plywood · 3 mm
Power100 %
Speed8 mm/s
Passes1
Single sourceSafety
Areas
Engrave, cut and mark with CO₂, diode, fiber and UV lasers.
Meyki parameter help
Meyki searches published parameter cards only and links every source it used. If context is missing, it asks.
AI can make mistakes. Always test on scrap and follow manufacturer and safety guidance.
A starting point in three steps
Select only what you know. More context produces better matches.
Matching settings
Directly sourced starting point for cut with xTool D1 Pro 20 W.
Directly sourced starting point for cut with xTool M1 10 W.
Directly sourced starting point for cut with xTool M1 5 W.
Directly sourced starting point for engrave with xTool D1 Pro 20 W.
Directly sourced starting point for engrave with xTool M1 10 W.
Dark, readable lettering with little depth. A starting point for nameplates and gift sets.
Directly sourced starting point for cut with xTool F1 · 10 W blue-light module.
Directly sourced starting point for engrave with xTool F1 · 2 W IR module.
Directly sourced starting point for score with xTool F1 · 2 W IR module.
Bright frosted engraving from the back for signs and display pieces.
Directly sourced starting point for engrave with xTool D1 Pro 40 W.
Directly sourced starting point for cut with xTool D1 Pro 40 W.
Directly sourced starting point for engrave with xTool D1 Pro 40 W.
Directly sourced starting point for engrave with xTool D1 Pro 40 W.
Directly sourced starting point for score with xTool D1 Pro 40 W.
Bright image engraving on dark slate. Contrast comes from power, resolution and image preparation.
Starting values for a high-contrast logo on brushed stainless steel using a fiber source.