Black opaque acrylic 3 mm — Score with xTool F1 · 2 W IR module
Directly sourced starting point for score with xTool F1 · 2 W IR module.
Single sourceStarting point, not a result guarantee
Context used for this setting
Context used for this setting
- Machine
- xTool F1 · 2 W IR module
- Laser technology
- IR diode
- Nominal power
- 2 W
- Material
- Black opaque acrylic
- Thickness
- 3 mm
- Goal
- Score
Starting values
Starting values
Do this
- Match material, thickness and laser module exactly.
- Test the value on comparable scrap first.
Avoid this
- Do not transfer values to other power classes or material variants.
Check before you start
Check before you start
Process clearly identified chlorine-free acrylic only. Never laser PVC.
- Chlorine-containing plastics release toxic and corrosive gases.
Approach the result safely
Approach the result safely
Start on a comparable scrap piece. Change one parameter at a time and document the result before moving to the final workpiece.
This value comes from an openly licensed dataset referencing the official xTool material table. Always run a test patch first.
Sources and confidence
Sources and confidence
Single source
- Confirmations
- 1
- Updated
- August 21, 2026
- Shared by
- Open-source curation
Similar settings
Similar settings
Laser engraving
Clear acrylic 3 mm — reverse engraving
Bright frosted engraving from the back for signs and display pieces.
- Power
- 18 %
- Speed
- 400 mm/s
- Passes
- 1
Laser cutting